Skip to main content
Assign Product To Layout is the fastest way to put products away. You scan the label on a rack, shelf or box, then scan each product. Eaglecart records that the product is stored there and, depending on your scan settings, moves its available units onto that layout.

Before you start

The screen

Step by step

  1. Go to Warehouse → Assign Product To Layout.
  2. Scan the barcode label on the rack, shelf or box where you’re putting products. Check LOCATION and LOCATION LAYOUT show the right place.
  3. If you see the parent notice, decide whether you really want the whole rack or shelf. Usually it’s better to scan the exact box.
  4. Click Scan settings and choose a mode (see below).
  5. Click into Scan Product Barcode and scan a product.
  6. Read the result line to confirm what happened. Scan the next product, and repeat.
  7. When this layout is done, click Scan Location Layout and scan the next one.

The three scan modes

Choose the mode in Scan settings before you scan products.

Assign All Available Quantity to Scanned Location Layout

Moves the product’s available quantity from the other layouts in the same store location onto the scanned layout. After the scan, all of the product’s available units in that location are recorded on this layout. Use it when you put away a whole delivery, or consolidate a product into one box.

Assign Partial Quantity to Scanned Location Layout

Asks how many units to assign, then places that number on the scanned layout. Use it when you split stock across several shelves or boxes.

Assign Only Scanned Location Layout

Links the product to the scanned layout without moving or changing any quantities. Use it to record that a product belongs on a shelf before stock arrives, or to add a second place where staff can find it.
The first two modes change how a product’s units are spread across layouts. Assign Only Scanned Location Layout changes nothing about quantities. Check your mode in Scan settings before scanning a batch.

Example: 100 jackets, three ways

You have 100 available jackets in Main warehouse, all on RAK 1 > Shelf 1 > box 2. You scan box 3 and then the jacket barcode: In every case Main warehouse still holds 100 jackets. Scan modes move units between layouts inside one location. They never transfer stock to another store location, and they don’t change the product’s total.

Check the result

Troubleshooting

The product scan does nothing. Click into Scan Product Barcode first so the scanner types there. Check the barcode belongs to a product in this store. Quantities ended up on the wrong box. Open the product in Inventory By Product, correct the quantities per layout and click Update Quantities. I see the parent notice. You scanned a rack or shelf that has children. Click Scan Location Layout and scan the specific box if that’s what you meant. The location is wrong. Check LOCATION in the scanned details. Make sure the label belongs to a layout in the location you expect.