> ## Documentation Index
> Fetch the complete documentation index at: https://help.eaglecart.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Mark Vehicle Damage on the Diagram in Eaglecart Workshop

> Record dents and damage on the vehicle diagram of an Eaglecart Workshop job, learn the 30 marker limit, and see the markers on the printed job card.

[Help Center](https://help.eaglecart.com/introduction.md)

[Workshop](https://help.eaglecart.com/workshop.md)

Mark vehicle damage

# Mark vehicle damage

The damage diagram lets you record the condition of a vehicle when it arrives. Mark each dent or damaged area so the mechanic can see it on the printed job card.

## Where to find it

Open a job from **Workshop → Jobs**. In the left column of the job editor, find the **Tap to mark damage/dents** card.

## Mark damage

1. Open the job and find the **Tap to mark damage/dents** card.
2. Tap or click the diagram at the position of the damage. A red dot appears.
3. Repeat for each damaged area.

## The diagram depends on the vehicle

Eaglecart shows a diagram that matches the vehicle type. A car, an SUV and a bus each use their own diagram, so a bus looks different from a car. The diagram is not one generic image used for every vehicle.

## Marker limit

You can place a maximum of 30 damage markers on a job. If you cannot add another marker, you have reached that limit.

## Remove markers

**Clear all dots** removes every marker from the diagram. It is the confirmed way to remove markers. Check the diagram after using it, then place the markers you still need.

## On the printed job card

The diagram and its damage markers print on the workshop job card, labelled "TAP TO MARK DAMAGE/DENTS". See [Print a workshop job card](https://help.eaglecart.com/workshop/print-a-job-card.md).

> [!NOTE]
>
> The diagram is an inspection record. It does not diagnose mechanical faults.

## Troubleshooting

* **The diagram looks different for a bus.** Diagrams follow the vehicle type.
* **I cannot add more markers.** The limit is 30 per job. Use **Clear all dots** and re-mark only what you need.

## Related guides

* [Vehicle records and identification](https://help.eaglecart.com/workshop/vehicle-records-and-identification.md)
* [Upload and organize vehicle images](https://help.eaglecart.com/workshop/vehicle-images.md)
* [Capture customer signatures](https://help.eaglecart.com/workshop/customer-signatures.md)
* [Print a workshop job card](https://help.eaglecart.com/workshop/print-a-job-card.md)
* [Edit a workshop job](https://help.eaglecart.com/workshop/edit-a-workshop-job.md)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.